Enco offers several types of centering hub for the CD Pro 2. Different centering hubs are required for different jukebox models.
Centering hub detailed installation instructions
- The black plastic truncated-cone centering hub is the standard hub for the CD Pro 2 that is installed at the Philips factory. This hub is used for late model NSM jukeboxes.
- The milled-aluminum hub is used for early-model NSM jukeboxes.
- The Enco cone-type hub is used for Rowe and Rock-Ola jukeboxes.
PHILIPS STANDARD CENTERING HUB
This is Philips’s standard factory-installed hub. This centering hub is standard issue on every CD Pro 2 produced at the plant in Hungary.
This is also the hub that NSM uses in their later model jukeboxes. No change is necessary for NSM jukeboxes that use the ES V or later NSM changer mechanism.
MILLED ALUMINIUM CENTERING HUB
This milled-aluminum centering hub is designed to work with older NSM jukeboxes that were originally loaded with NSM’s ES IV change mechanism. This hub allows the plastic flange in the center of NSM’s proprietary clamper of this era to seat properly on the CD Pro 2′s turntable and properly clamp the disc in place. We have included a picture of the turntable and clamper that you will find in an NSM ES IV jukebox.
Each hub is individually milled out of aluminum rod-stock to the exact specifications of the original replacement parts offered by NSM.
These hubs are available for an additional charge. Please contact Enco direct for more information.
ENCO CONE-TYPE CENTERING HUB
Certain jukebox manufacturers replace the Philips standard factory-installed centering hub on the CD Pro 2 with a cone-tipped centering hub during production of their jukeboxes. Rowe and Rock-Ola both replace the factory-installed hub with a cone-tipped one of their own design.
Enco’s cone-type centering hub is designed to work with any jukebox in which the manufacturer has replaced the Philips standard factory-installed hub on the CD Pro 2. The Enco cone-type hub is designed to the exact specifications used for the Philips standard hub. It is a one-piece part, injection molded out of ABS plastic.
The Enco cone-type hub is designed to be press-fit on the center post of the turntable after the Philips standard hub has been removed. The Philips hub can be easily removed using two 2mm screwdrivers (see detailed instructions). No gluing is necessary.
One Enco cone-type centering hub is included when you purchase a CD Pro 2. It will not be installed unless you specify on the order page the type of jukebox you are servicing.